
Hardwood flooring in North York
Solid hardwood installation for North York houses, with subfloor preparation, room transitions and baseboards written into the agreed work.
Solid wood over a wood subfloor
We install solid hardwood as part of the flooring and interior finish work done by MRG Renovations Ltd., a general contractor.
For a house in Bathurst Manor or Willowdale, start with the rooms you want to change and whether they connect through an open hallway.
Solid hardwood needs a wood subfloor suitable for nailing, which must be checked before choosing the width or pattern.
Tell us if the current surface is carpet, strip wood or something fitted over an older floor, and mention any loose or noisy spots.
A room measurement alone does not show the layers that need removing or the height left at the doorway.

Board width, direction and the adjoining rooms
Send the wood species, board width and thickness if you have already chosen a product, along with the name on the sample.
A long hallway, a bay window and a fireplace all affect where the boards begin and how the cut edges fall.
Include closets and the short passage outside each bedroom when you describe the area, because those spaces need flooring and their own cuts.
Herringbone and borders are available within the hardwood work, and the pattern changes both the layout and the amount of wood needed.
Show the colour and height of the retained floor at the doorway where it meets the new boards.
Preparation before the boards go down
A flat, dry and secure subfloor is needed, with preparation agreed alongside installation.
Wood changes with room humidity, so the product instructions determine the conditions and time needed before installation.
Tell us where the boxes could sit indoors and whether the heating is working in the rooms where the floor will go.
The gap around the room lets the wood move, with baseboard or quarter round covering the edge after installation.
Check the new floor height at doors, closet tracks and the top stair before ordering material.
A floor replacement in an occupied house
Tell us which rooms still need to be used and whether the route to the kitchen or bathroom crosses the work area.
Furniture moving, removal of old flooring and hauling its waste are included when those jobs are agreed in writing.
List large cabinets and other pieces that cannot move through the doorway in one piece so they are considered before work is scheduled.
For a North York house with a shared driveway, describe the delivery entrance and where the flooring boxes can be carried inside.
If the job includes stairs or new trim, put those in the same request so the meeting points are considered together.
Related work and North York access
Questions about hardwood flooring
What base does solid hardwood need?
We install solid hardwood as part of the flooring and interior finish work done by MRG Renovations Ltd., a general contractor.
For a house in Bathurst Manor or Willowdale, start with the rooms you want to change and whether they connect through an open hallway.
Solid hardwood needs a wood subfloor suitable for nailing, which must be checked before choosing the width or pattern.
How are board direction and neighbouring floors considered?
Send the wood species, board width and thickness if you have already chosen a product, along with the name on the sample.
A long hallway, a bay window and a fireplace all affect where the boards begin and how the cut edges fall.
Include closets and the short passage outside each bedroom when you describe the area, because those spaces need flooring and their own cuts.
What preparation happens before hardwood is installed?
A flat, dry and secure subfloor is needed, with preparation agreed alongside installation.
Wood changes with room humidity, so the product instructions determine the conditions and time needed before installation.
Tell us where the boxes could sit indoors and whether the heating is working in the rooms where the floor will go.
Describe the rooms and the floor
Send the rooms, the rough area and what floor is there now, and we reply with questions or a time to measure.